Pro Boat Shockwave 36 RTR w/T-Drive
Product Description
Key Features
Completely ready-to-run
Water-cooled Dynamite .32 Marine w/ Tiger Drive and electric starter
Stainless steel and aluminum running hardware
Prather propeller
Pre-painted fiberglass hull
ProBoat AM 27mHz Pistol grip radio system
Speeds of up to 35 mph
Overview
Measuring over three feet in length, the Pro Boat ShockWave 36 is a ready-to-run deep-vee speedster that can reach speeds in excess of 30mph. The power comes from the installed Dynamite .32 Marine engine. The Dynamite .32 Marine is water-cooled and comes equipped with a convenient electric start and high performance tuned exhaust system. Control is provided by ProBoat's trusty pistol grip radio system that offers drivers analog adjustment of steering rates as well as throttle and steering trim.
The ShockWave's workmanship is equally impressive. The hull is professionally built from fiberglass and painted with the same technologies used in todays automotive finishes. Rubber motor mounts significantly reduce vibration and lengthen the hull’s life. There are no plastic parts on this boat. All the running hardware is stainless steel and aluminum, including the adjustable trim tabs that let drivers adjust the "ride" for varying wave conditions. Anti-skid fins, an oversized rudder and an adjustable strut for the Prather prop add even more ride-tuning options.
This is high-octane RC offshore excitement at its best.
Specs
Length: 36 in.
Beam: 9 in.
Engine Size: .32 water-cooled Marine
Weight: 6.25 lbs.
Speed: 30 m.p.h.
Radio: 2 channel
Hull Material: fiberglass
Trim Scheme Colors: white
Prop Size: 1.90x3.0 in.
Hull Type: Deep-V
Kit/RTR: RTR
Drive System: Flex shaft
Exhaust: Tuned pipe
Needed to Complete
20% Nitro Fuel
Fuel Bottle
Glow Plug Wrench
7.2v Battery and charger
Ni-Cd Glow Driver
12 AA alkaline batteries (8 for the transmitter and 4 for the receiver)
Clear tape to seal radio box
Completely ready-to-run
Water-cooled Dynamite .32 Marine w/ Tiger Drive and electric starter
Stainless steel and aluminum running hardware
Prather propeller
Pre-painted fiberglass hull
ProBoat AM 27mHz Pistol grip radio system
Speeds of up to 35 mph
Overview
Measuring over three feet in length, the Pro Boat ShockWave 36 is a ready-to-run deep-vee speedster that can reach speeds in excess of 30mph. The power comes from the installed Dynamite .32 Marine engine. The Dynamite .32 Marine is water-cooled and comes equipped with a convenient electric start and high performance tuned exhaust system. Control is provided by ProBoat's trusty pistol grip radio system that offers drivers analog adjustment of steering rates as well as throttle and steering trim.
The ShockWave's workmanship is equally impressive. The hull is professionally built from fiberglass and painted with the same technologies used in todays automotive finishes. Rubber motor mounts significantly reduce vibration and lengthen the hull’s life. There are no plastic parts on this boat. All the running hardware is stainless steel and aluminum, including the adjustable trim tabs that let drivers adjust the "ride" for varying wave conditions. Anti-skid fins, an oversized rudder and an adjustable strut for the Prather prop add even more ride-tuning options.
This is high-octane RC offshore excitement at its best.
Specs
Length: 36 in.
Beam: 9 in.
Engine Size: .32 water-cooled Marine
Weight: 6.25 lbs.
Speed: 30 m.p.h.
Radio: 2 channel
Hull Material: fiberglass
Trim Scheme Colors: white
Prop Size: 1.90x3.0 in.
Hull Type: Deep-V
Kit/RTR: RTR
Drive System: Flex shaft
Exhaust: Tuned pipe
Needed to Complete
20% Nitro Fuel
Fuel Bottle
Glow Plug Wrench
7.2v Battery and charger
Ni-Cd Glow Driver
12 AA alkaline batteries (8 for the transmitter and 4 for the receiver)
Clear tape to seal radio box
